Suitable:
Wherever a high measurement accuracy along with a high overpressure safety and sturdiness is required. For example, for calibration of pressure gauges (using the hand pump HP 40).
Materials:
Housing: plastic, connection: 1.4571, seal: NBR: (>= 1000 bar: 1.4571), Sensor: Ceramic (>= 1000 bar: 1.4571)
Display:
4-digit LCD display, height of digits: 12.7 mm
Connection thread:
G 1/4" * (>= 1000 bar: G 1/2" *)
Temperature range:
Environment: 0 to +60 °C, medium: -30 to +85 °C
Permissible overpressure:
up to 40 bar 3 x, up to 160 bar: 2 x, from 250 bar onwards: 1.5 x full scale value** (violating the lower measurement value is not permitted)
Class:
0,5
Conversion rate:
5 measurements / second
Automatic shut-off time:
8 min.
Auxiliary energy:
9V block battery, service life: 5,000 h
Protection class:
IP 65
Optional:
Continuous operation -D, deviating switch-off times -4, -16, -32, -64., continuous operation with external 24 V DC supply (M 12 connector, A-coded, 4-pin, 4-wire) -D24, continuous operation with external 24 V DC supply and additional switching output (30 V AC/DC, max. 2 A, M 12 connector, A-coded, 5-pin, 5-wire) -D24S, ISO factory calibration (following DIN EN 837-1, determination of measurement deviation and hysteresis), DAkkS-DKD calibration (in accordance with DKD-R 6-1, traceable and accredited in accordance with DIN EN ISO/IEC 17025, decision rule 4)
*with centring pin for profiled seal, **600 bar: 1.3-X overpressure-safe
{{ $t('shop.all.dokumente') }}: