3/2-way solenoid valve G 1/2" closed (NC) without power

Materials:
Body: brass (DN 25 & DN 40: red bronze), internal parts: brass / stainless steel, seal: NBR (types G 1/8" & G 1/4": FKM)

Temperature range:
0°C to max. +80°C (G 1/8" & G 1/4": -10°C to max. +130°C), environment max. +50 °C

Media:
Compressed air, neutral gases, water, neutral low-viscosity media, heating oil, other media on request

Installation position:
any (G 1/8" & G 1/4": upright magnet)

Control voltages:
Standard: 24 V DC, 230 V AC, upon request other voltages

Voltage tolerance:
± 10 %

Protection class:
IP 65 (plug size 3)

Information:
These valves are always supplied with a solenoid coil and a connector plug.

Warning:
For opening or closing, servo-controlled valves require a pressure difference between the valve inlet and valve outlet. The pressure difference is given as minimum pressure. There is a pressure compensation in the valve, resulting that no or little medium is used at the valve outlet, the valve will no longer function (it opens or closes unreliably).

Control voltage	115 V AC
function	closed (NC) without power
Thread (2x)	G 1/2"
Thread exhaust air	G 3/4" (female thread)
Operating pressure [bar]	1 - 16
DN [mm]	12
L [mm]	76
Kv value* [l/min]	43
Power consumption (AC) [VA]	14
Temperature range [°C]	0 to +80

{{ $t('shop.all.gewicht') }}	1,1 kg / pcs
{{ $t('shop.display.artikel.zollwarennummer') }}	84818079
{{ $t('shop.display.artikel.rohskonform') }}	{{ $t('shop.all.ja') }}