2/2-way solenoid valve G 2", closed (NC) without power,NBR Eco

Materials:
Body: brass, internal parts: brass / stainless steel, seal: NBR (types G 1/8" & G 1/4": FKM)

Temperature range:
-10°C up to max. +80°C (types G 1/8" and G 1/4": -10°C up to max. +130°C), ambience: max. +50 °C

Media:
Compressed air, neutral gases, water, neutral low-viscosity media, other media on request

Installation position:
With upright magnets

Control voltages:
Standard: 24 V DC, 230 V AC, upon request other voltages

Voltage tolerance:
± 10 %

Protection class:
IP 65

Optional:
FKM seal (-10°C to max. +130°C) -V, EPDM seal for air and warm water (-10°C to max. +120°C) -EP

Information:
These valves are always supplied with a solenoid coil and a connector plug.

Warning:
For opening or closing, servo-controlled valves require a pressure difference between the valve inlet and valve outlet. The pressure difference is given as minimum pressure. There is a pressure compensation in the valve, resulting that no or little medium is used at the valve outlet, the valve will no longer function (it opens or closes unreliably).

Version	2/2-way solenoid valve
Control voltage	24 V AC
function	closed (NC) without power
Thread	G 2"
Seals	NBR
Operating pressure [bar]	0,5 - 16
DN [mm]	50
L [mm]	165
Kv value* [l/min]	684
Power consumption (AC) [VA]	22
Structural shape solenoid coil	P
Spare solenoid coil	MAG P 24VAC
Spare membrane NBR	SLP 20 MEM N
Spare membrane FKM	SLP 20 MEM V
Spare membrane EPDM	SLP 20 MEM EP
Media temperature [°C]	-10 to +80

{{ $t('shop.all.gewicht') }}	4,1 kg / pcs
{{ $t('shop.display.artikel.zollwarennummer') }}	84812090
{{ $t('shop.display.artikel.rohskonform') }}	{{ $t('shop.all.ja') }}
{{ $t('shop.all.hersteller') }}	EMC