2/2-way solenoid valve G 1/4" closed (NC) without power,EPDM

Materials:
Body: brass, internal parts: brass / stainless steel, seal: NBR (types G 1/8" & G 1/4": FKM)

Temperature range:
-10°C to max. +85°C (types G 1/8" and G 1/4": -10°C to max. +130°C), environment: max. +50 °C

Media:
Compressed air, neutral gases, water, neutral low-viscosity media, heating oil, other media on request

Installation position:
With upright magnets

Control voltages:
Standard: 24 V DC, 230 V AC, upon request other voltages

Voltage tolerance:
± 10 %

Protection class:
IP 65 (plug size 3)

Optional:
FKM seal (-10°C to max. +130°C) -V, EPDM seal for air and warm water (-10°C to max. +120°C) -EP

Information:
These valves are always supplied with a solenoid coil and a connector plug.

Warning:
For opening or closing, servo-controlled valves require a pressure difference between the valve inlet and valve outlet. The pressure difference is given as minimum pressure. There is a pressure compensation in the valve, resulting that no or little medium is used at the valve outlet, the valve will no longer function (it opens or closes unreliably).

Control voltage	24 V DC
function	closed (NC) without power
Thread	G 1/4"
Seals	EPDM
Operating pressure [bar]	0 - 16
DN [mm]	2,2
L [mm]	38
Kv value* [l/min]	2,4
Power consumption (DC) [W]	14
Structural shape solenoid coil	G
Spare solenoid coil	MAG G 24V=
Media temperature [°C]	-10 to +120

{{ $t('shop.all.gewicht') }}	300 g / pcs
{{ $t('shop.display.artikel.zollwarennummer') }}	84812090
{{ $t('shop.display.artikel.rohskonform') }}	{{ $t('shop.all.ja') }}